The non-standard automation equipment smoothing agent is between the friction surfaces, due to the wear of hard particles, surface corrosion, and the welding and tearing between the metal surfaces. Therefore, by supplying enough smoothing agent to the friction surface, good smoothing conditions can be formed, the oil film can be prevented from being damaged, and the matching accuracy of the parts can be maintained, thereby greatly reducing wear. The following editor of non-standard automation equipment manufacturers will introduce to you:

A. Avoid corrosion and maintain metal appearance

The mechanical appearance of non-standard automation equipment must inevitably come into contact with surrounding media (such as air, moisture, vapor, corrosive gas and liquid, etc.) to cause rust, corrosion and damage to the metal surface of the machine. In particular, the low-temperature vehicles in metallurgical plants and the corrosion and wear of chemical plants are more serious.

Smooth oil or grease has no corrosive effect on metals, and can isolate moisture in humid air and harmless media from corrosion. We apply a layer of oil or grease with anti-corrosion and anti-rust additives on the metal surface of the machine to play the role of anti-corrosion, anti-rust and maintenance of the metal surface.

B. Lower the temperature

Non-standard automation equipment smoothing agent can reduce the coefficient of friction and reduce the occurrence of frictional heat. The work done by the machine we operate to restrain friction is all converted into heat, partly dispersed from the body, and partly reduced the temperature of the machine from time to time. The concentrated circulation of liquid smoothing agent can take away the heat generated by friction, and play the role of cooling, so that the machine can be controlled to operate within the required temperature range.